Hikvision DS-3E0110MP-E-M 10-Port Fast Ethernet Unmanaged PoE Switch

The Hikvision DS-3E0110MP-E-M is a 10-port Fast Ethernet unmanaged PoE switch built to power and connect a small IP camera system without any configuration. Eight of its ten 10/100 Mbps RJ45 ports deliver Power over Ethernet, so each camera needs only one network cable for both data and power, while the remaining two ports handle the uplink to your NVR or router. For the typical Egyptian villa, shop or small office running six to eight Hikvision IP cameras, it removes the need for a separate 12V adaptor at every camera point — a real advantage in buildings where mains sockets near the ceiling are scarce. Order the DS-3E0110MP-E-M today from Speed4Trading with genuine Hikvision stock, official warranty and fast delivery across Egypt.

Why Buy the Hikvision DS-3E0110MP-E-M?

Most small camera installations are let down not by the cameras but by messy power. Running a 12V adaptor to every camera means more cable, more junction boxes and more points that can fail or be tampered with. The DS-3E0110MP-E-M collapses all of that into one metal box in the cabinet: power and data leave together on a single Cat5e or Cat6 run, and if a camera needs to be restarted you simply unplug one cable. Because the switch is unmanaged there is nothing to set up — plug it in and the network comes up, which keeps installation time and labour cost down for installers and end users alike.

Key Features & Benefits

• Powers up to eight Hikvision PoE IP cameras over the same cable that carries their video, cutting cabling and adaptor costs
• Two extra 10/100 Mbps ports keep the uplink to your NVR or router separate from the camera ports
• 60 W total PoE budget spread across the eight powered ports, sized for typical fixed-lens, bullet and dome cameras
• Completely unmanaged and plug-and-play — no IP address, no web login, no configuration to learn
• Metal, fan-free enclosure runs silently and copes with dusty wall cabinets better than plastic housings
• Store-and-forward switching with automatic MAC address learning and ageing for clean, collision-free traffic
• Auto MDI/MDI-X on every port, so straight-through and crossover cables both work first time
• Compact enough to sit inside a camera cabinet next to a 4-channel or 8-channel NVR

Technical Specifications

• Model: DS-3E0110MP-E-M
• Type: Unmanaged Layer 2 PoE switch
• Total ports: 10 × RJ45, 10/100 Mbps
• PoE ports: 8
• Non-PoE ports: 2 × 10/100 Mbps RJ45
• Total PoE power budget: 60 W
• Switching method: Store-and-forward
• Port negotiation: Auto MDI/MDI-X
• MAC addresses: Automatic learning and ageing
• Enclosure: Metal, fan-free design
• Management: None — plug and play

Perfect For

This switch is sized for the jobs we quote most often in Egypt: a villa or duplex with six to eight cameras covering the gate, garage and stairwell; a pharmacy, mobile shop or supermarket branch that needs tills and entrances watched; a small clinic or dental practice; a workshop or warehouse office; or a single floor of an apartment building where the cameras feed one NVR in the reception. It also works well as a satellite switch on a larger site, feeding one wing or floor back to the main rack.

Easy Installation & Compatibility

Mount the switch on a shelf or inside a wall-mounted camera cabinet, connect each Hikvision PoE IP camera to ports 1–8 with Cat5e or Cat6 cable, and use one of the two remaining ports to reach your NVR, router or main switch. There is no console, no firmware setup and no VLAN to plan. Because PoE delivery and switching are standards-based, the switch happily powers Hikvision IP cameras and passes traffic for Hikvision NVRs, with the cameras and recorder still managed as usual through Hik-Connect, iVMS-4200 or Hik-Partner Pro — the switch itself stays invisible on the network and needs no app.

What's in the Box

• 1 × Hikvision DS-3E0110MP-E-M PoE switch
• 1 × power adaptor
• Mounting accessories
• Quick start guide

Buy with Confidence from Speed4Trading in Egypt

Speed4Trading has supplied Hikvision equipment to Egyptian installers, integrators and end users since 1999, from our base in Mokattam, Cairo. Every switch we sell comes from official Hikvision supply channels, and our technical team is happy to check your PoE budget and port count before you order so you buy the right switch the first time. We deliver nationwide.

Genuine Hikvision Quality & Warranty

This is a 100% authentic Hikvision product supplied with official Hikvision warranty — you can verify the brand and product range on the official Hikvision website. Browse our full range of network switches if you need more ports, gigabit speed or a larger PoE budget.

Frequently Asked Questions

How many cameras can the DS-3E0110MP-E-M actually power?
Up to eight, as long as their combined draw stays within the 60 W PoE budget. Standard fixed-lens bullet and dome cameras fit comfortably; if you are mixing in PTZ or illuminator-heavy models, add up their rated PoE consumption first or ask our team to check it for you.

Do I still need power adaptors for the cameras?
No. Cameras connected to ports 1–8 draw power from the switch over the network cable, so you only need mains power at the switch itself.

Is this a gigabit switch?
No — all ten ports are 10/100 Mbps Fast Ethernet. That is ample for most 2MP and 4MP camera streams. If you need gigabit ports for higher-resolution cameras or heavy playback traffic, look at our gigabit PoE models instead.

Does it need to be configured?
No. It is an unmanaged switch with no IP address and no web interface. Connect the cables and it works.

Best Price for the Hikvision DS-3E0110MP-E-M in Egypt

Get the DS-3E0110MP-E-M for just 1,375 EGP with genuine Hikvision warranty and fast delivery nationwide. Order now from Speed4Trading, or contact our team for help choosing the right solution.