Hikvision DS-K1102AM Mifare Card Reader with RS-485 & Wiegand

The Hikvision DS-K1102AM is a slim Pro Series Mifare card reader built to sit beside a door and feed card credentials back to an access controller. It reads 13.56 MHz M1 (Mifare) cards, outputs over RS-485 with OSDP support or over Wiegand, and fits a standard 86 or 120 gang box, which makes it one of the easiest ways to add proper card-based door control to an office, clinic or apartment building. In Egypt it is most often used on main entrances, staff-only corridors and server rooms, where a single clean reader plate on the wall replaces a key that gets copied and lost. Order the DS-K1102AM today from Speed4Trading with genuine Hikvision stock, official warranty and fast delivery across Egypt.

Why Buy the Hikvision DS-K1102AM?

Mechanical keys are the weakest part of most buildings. Once a key is copied you have no record of who went where, and re-keying a door is expensive and disruptive. The DS-K1102AM moves that control into software: cards are issued and revoked centrally, every presentation is logged by the controller, and a lost card is cancelled in seconds instead of changing a lock. Because it is a reader rather than a standalone terminal, it keeps all decision-making inside your Hikvision access controller, so one panel can secure several doors with consistent rules and a single event log.

Key Features & Benefits

• Reads 13.56 MHz M1 (Mifare) cards, the most widely stocked credential type in the Egyptian market
• RS-485 output with OSDP protocol support for a secure, standards-based link to the controller
• Wiegand W26 and W34 output so it also drops into existing third-party panels
• Tamper-proof alarm warns the controller if the reader is prised off the wall
• Built-in audible beeper gives instant feedback on a valid or rejected card
• Slim 14 mm profile mounts flush into an 86 or 120 gang box for a tidy finish
• DIP-switch address setting makes multi-reader wiring quick and repeatable
• Very low 2 W draw, so one 12 VDC supply can run several readers on a site

Technical Specifications

• Card type: M1 (Mifare) card, 13.56 MHz
• Keypad: none (see DS-K1102AMK for the keypad version)
• Communication: 1 × RS-485 port, supports OSDP protocol
• RS-485 baud rates: 9600 / 19200 / 38400 bps
• Wiegand output: W26 and W34
• Power supply: 12 VDC, 500 mA
• Power consumption: 2 W or less
• Tamper alarm: supported
• Indicator: built-in audible beeper
• ID setting: DIP switch
• Working temperature: -20 °C to 65 °C
• Working humidity: 10% to 90%, non-condensing
• Dimensions: 121 × 86.5 × 14 mm
• Weight: 0.14 kg or less
• Installation: 86 and 120 gang box

Perfect For

Offices and co-working floors that need to separate staff areas from reception. Clinics and laboratories where only trained staff should reach treatment or sample rooms. Apartment buildings and gated compounds that want card entry on the lobby door instead of a shared key. Factories and warehouses using it at gates, stores and workshop entrances, since the wide -20 °C to 65 °C range copes easily with Egyptian summers in a sheltered position. Schools and training centres controlling access to labs, IT rooms and administration wings.

Easy Installation & Compatibility

The DS-K1102AM mounts into a standard 86 or 120 gang box with the supplied back plate, so in most buildings no new chasing is needed. Wiring is simple: 12 VDC power, then either an RS-485 pair to a Hikvision access controller or the Wiegand data lines to a third-party panel. A DIP switch sets the reader address, which keeps commissioning straightforward when several readers share one RS-485 bus. Because the reader reports to a controller, your doors, schedules, cardholders and reports are managed in Hikvision software such as iVMS-4200 or Hik-Partner Pro through that controller, rather than being configured on the reader itself. RS-485 with OSDP support also means you are not locked into a single panel brand.

What's in the Box

• DS-K1102AM Mifare card reader
• DS-K3G200X mounting accessory
• DS-K3B411SX accessory
• Quick start guide and fixing screws

Buy with Confidence from Speed4Trading in Egypt

Speed4Trading has supplied Hikvision security equipment from Mokattam, Cairo since 1999, to installers, integrators and end users alike. We stock readers, controllers, locks and cards as a complete set, so you are not left hunting for the one part that makes the door work. Call us with your door count and lock type and we will tell you exactly what you need — and nothing you do not.

Genuine Hikvision Quality & Warranty

Every unit we sell is 100% authentic and covered by the official Hikvision warranty. You can verify the brand and product range on the official Hikvision website. Browse our full range of card readers and access controllers to pair this reader with the right panel, or see our fingerprint and time attendance range if you also need to record working hours.

Frequently Asked Questions

Does the DS-K1102AM work on its own?
No. It is a reader, not a standalone terminal — it must be connected to an access controller, which holds the cardholder list and drives the lock.

Which cards does it read?
13.56 MHz M1 (Mifare) cards. It does not read 125 kHz EM cards; for those, use the EM version of the 1102A series.

Can I use it with a non-Hikvision controller?
Yes. It provides Wiegand W26/W34 output and RS-485 with OSDP support, so it works with most standard access control panels.

Can I add a PIN code as well as a card?
Not on this model. Choose the DS-K1102AMK, which is the same reader with a 12-key keypad for card plus password entry.

Best Price for the Hikvision DS-K1102AM in Egypt

Get the DS-K1102AM for just 1,870 EGP with genuine Hikvision warranty and fast delivery nationwide. Order now from Speed4Trading, or contact our team for help choosing the right solution.