Hikvision DS-K1T8005MFWX-B Wi-Fi Fingerprint Access Control Terminal

The Hikvision DS-K1T8005MFWX-B is a Pro Series fingerprint access control terminal with built-in Wi-Fi, made for sites where running a network cable to the door is the hardest part of the job. It authenticates by fingerprint, M1 (Mifare) card or PIN, drives the door lock directly, and holds 3,000 fingerprints and 100,000 events on board. For Egyptian offices, clinics and branch shops in finished buildings — where chasing a wall for data cable means repainting it — the 2.4 GHz Wi-Fi link makes installation a matter of power and mounting. Order the DS-K1T8005MFWX-B today from Speed4Trading with genuine Hikvision stock, official warranty and fast delivery across Egypt.

Why Buy the Hikvision DS-K1T8005MFWX-B?

The usual reason an access control project stalls is cabling: the door is in the right place but the switch is three rooms away. This terminal joins your existing wireless network instead, and can be set up through Wi-Fi AP mode straight from a phone or laptop with no cable at all. Once it is on, it is a full Pro Series door terminal — three authentication methods, a lock output, exit button, door contact and tamper switch, local time and attendance, and an in-built web client for configuration. Capacity is three times the entry-level models, so it scales from one office to a whole floor.

Key Features & Benefits

• Built-in 2.4 GHz Wi-Fi removes the data cable run — a real saving in finished offices and rented premises.
• Wi-Fi AP mode lets you commission the terminal from a phone or laptop before it ever joins your network.
• 3,000 fingerprints and 3,000 M1 cards, enough for a large office or a multi-shift site.
• 100,000 events held locally, so the access and attendance trail survives a Wi-Fi or power interruption.
• Local time and attendance function, so the same reader that opens the door also records the shift.
• Configured from a built-in web client — no dedicated software needed on a PC.
• Battery support in the bracket keeps the terminal alive through short mains cuts, a practical plus in Egypt.
• Low 6 W draw, so one small 12 V supply comfortably runs the terminal and the door hardware.

Technical Specifications

• Display: 2.4-inch LCD, 320 × 240 resolution
• Authentication: fingerprint, M1 (Mifare) card, PIN
• Fingerprint module: optical, 1:1 and 1:N comparison
• Fingerprint capacity: 3,000
• Card capacity: 3,000 (M1 card)
• Event capacity: 100,000
• Wi-Fi: 2.4 GHz, 802.11b/g/n, Wi-Fi AP mode supported
• Wired network: 1 × RJ-45, 10/100 Mbps self-adaptive
• Door interfaces: 1 lock control output, 1 exit button input, 1 door contact input, 1 tamper switch
• USB: 1 port
• Protocols: ISAPI, ISUP 5.0; configuration via web client
• Operating system: Linux
• Attendance: local time and attendance supported
• Power supply: 12 VDC, battery supported in the bracket
• Power consumption: ≤ 6 W
• Operating temperature: -10 °C to +55 °C
• Operating humidity: 0 to 90%, non-condensing
• Audio: built-in buzzer

Perfect For

Offices and co-working floors in finished buildings, clinics and dental practices, pharmacies and retail branches, private schools and language centres, serviced apartments and compound facilities, server and store rooms that need a controlled door without new trunking, and any Cairo or Alexandria business that wants proper access control and attendance without opening up the walls.

Easy Installation & Compatibility

Mount the terminal on the wall beside the door, bring it 12 VDC, and connect the lock, exit button and door contact to the rear terminals. From there you can either plug in an RJ-45 cable or join your wireless network — and because Wi-Fi AP mode is supported, the initial setup can be done entirely from a phone. All configuration happens in the terminal's own web client, and the device communicates over ISAPI and ISUP 5.0, the protocols Hikvision's access control platforms use. The lock output drives a magnetic lock or electric bolt such as the DS-K4H250S or DS-K4T108 directly.

What's in the Box

• DS-K1T8005MFWX-B fingerprint access control terminal
• Mounting bracket with screw pack
• Wiring connectors for lock, exit button and door contact
• Quick start guide

Buy with Confidence from Speed4Trading in Egypt

Speed4Trading is an authorised Hikvision distributor in Mokattam, Cairo, serving both retail customers and B2B integrators nationwide. We stock the Pro Series terminals, the locks that go with them and the power supplies that make them work, so you are not chasing three suppliers for one door.

Genuine Hikvision Quality & Warranty

100% genuine Hikvision product with official Hikvision warranty — check the brand and model against the official Hikvision website. Compare it with other models in fingerprint & time attendance terminals, and pick the door hardware from electric locks & door hardware.

Frequently Asked Questions

Can it work on Wi-Fi only, with no network cable?
Yes. It has built-in 2.4 GHz 802.11b/g/n Wi-Fi and supports Wi-Fi AP mode for setup. A wired RJ-45 port is also provided if you prefer it.

How many fingerprints can it store?
3,000 fingerprints and 3,000 M1 cards, with 100,000 event records.

Does it keep working during a power cut?
The bracket supports a battery, which keeps the terminal running through short interruptions.

Do I need special software?
No. The terminal is configured from its own built-in web client, and it also integrates over ISAPI and ISUP 5.0.

Best Price for the Hikvision DS-K1T8005MFWX-B in Egypt

Get the DS-K1T8005MFWX-B for just 6,530 EGP with genuine Hikvision warranty and fast delivery nationwide. Order now from Speed4Trading, or contact our team for help choosing the right solution.