Hikvision DS-K1T807MBFWX-QRE1 IP65 fingerprint terminal with QR code and Bluetooth
Hikvision DS-K1T807MBFWX-QRE1 IP65 fingerprint terminal with QR code and Bluetooth
  • Access Control
  • Fingerprint Terminal
  • Hikvision
  • Outdoor IP65
  • PoE
  • QR Code

Hikvision DS-K1T807MBFWX-QRE1 IP65 Fingerprint Terminal with QR Code & Bluetooth

السعر الأصلي
LE 7,641.00
سعر الخصم
LE 7,641.00
السعر الأصلي
الشحن بيتحسب عند إتمام الطلب.
متوفر 38
Hikvision🛡️ موزّع هيكفيجن معتمد منذ 1999✅ ضمان رسمي سنة💰 الدفع عند الاستلام🚚 توصيل لكل مصر

تفاصيل المنتج

The Hikvision DS-K1T807MBFWX-QRE1 is a slim, IP65-rated fingerprint access control terminal that adds QR code and Bluetooth credentials to the usual fingerprint, card and PIN. It carries 5,000 fingerprints, 5,000 M1 cards and 150,000 event records, runs on 12 VDC or PoE, and survives -30 °C to 60 °C — so it can be mounted on an outdoor gate, a factory yard entrance or a rooftop plant room rather than only in an air-conditioned lobby. For Egyptian compounds, sites and facilities where visitors and contractors come and go, a QR code sent to a phone is far quicker than issuing a card. Order the DS-K1T807MBFWX-QRE1 today from Speed4Trading with genuine Hikvision stock, official warranty and fast delivery across Egypt.

Why Buy the Hikvision DS-K1T807MBFWX-QRE1?

Two problems push sites past a basic fingerprint reader. The first is weather and dust: an indoor-rated terminal on an exposed gate in Cairo summer or a Delta factory yard does not last. The second is visitors — every contractor, delivery driver and guest either needs a card that comes back or a person to let them in. This terminal answers both. IP65 sealing and a -30 °C to 60 °C operating range let it live outdoors, and QR code plus Bluetooth credentials mean temporary access can be issued to a phone and expire on its own. With 5,000 fingerprints and a 150,000-event log, it also scales to a serious site.

Key Features & Benefits

  • IP65-rated and rated from -30 °C to 60 °C — suitable for exposed gates, yards and unconditioned corridors.
  • Five credential types: fingerprint, M1 card, PIN, QR code and Bluetooth, so visitors and staff are handled differently without extra hardware.
  • QR code entry means temporary access can go to a phone instead of a plastic card that never comes back.
  • PoE support puts power and data on one cable, cutting the cost of reaching a remote gate.
  • 5,000 fingerprints and 5,000 cards, with a 150,000-record event log for a long, reviewable audit trail.
  • Wiegand (W26/W34) and RS-485 ports let it slot into an existing controller or panel rather than replacing it.
  • Two alarm inputs plus an alarm output, so door-forced and held-open conditions can trigger a siren or an NVR.
  • Slim 172 × 76 mm body at only 377 g, easy to mount on a narrow door frame or gate post.

Technical Specifications

  • Display: 2.4-inch LCD, 320 × 240 resolution
  • Authentication: fingerprint (1:1 and 1:N), M1 card, PIN, QR code, Bluetooth
  • Fingerprint capacity: 5,000
  • Card capacity: 5,000 (M1 card)
  • Event capacity: 150,000
  • Wi-Fi: 2.4 GHz, 802.11b/g/n, AP mode configuration
  • Wired network: 1 × RJ-45, 10/100 Mbps self-adaptive, PoE supported
  • RS-485: 1 × half duplex
  • Wiegand: 1 port, W26 and W34
  • I/O: 1 lock control output, 1 exit button input, 1 door contact input, 2 alarm inputs, 1 alarm output
  • USB: 1 port
  • Protocols: ISAPI, ISUP 5.0; configuration via web client
  • Operating system: Linux
  • Power supply: 12 VDC or PoE; optional battery in the bracket
  • Power consumption: ≤ 6 W
  • Protection rating: IP65
  • Dimensions: 172 × 76 × 27.5 mm; net weight 0.377 kg
  • Operating temperature: -30 °C to +60 °C
  • Operating humidity: 0 to 90%, non-condensing
  • Installation: wall mounted

Perfect For

Gated compounds and residential gates, factory and warehouse yard entrances, construction site offices, logistics depots and loading bays, parking entrances, clinics and laboratories with restricted zones, schools with an outdoor staff gate, and corporate sites that need a reviewable access log for staff and a self-expiring QR code for the stream of contractors and visitors.

Easy Installation & Compatibility

The terminal is wall mounted and can be fed either from a 12 VDC supply or over PoE from a Hikvision PoE switch, which is usually the cheaper route when the door is far from the equipment room. On the back you get a lock control output, exit button and door contact inputs, two alarm inputs and an alarm output, plus RS-485 and Wiegand W26/W34 — so it works as a stand-alone door terminal or as a reader reporting to an existing access controller. Configuration is done in the built-in web client, and the device integrates over ISAPI and ISUP 5.0 with Hikvision access control platforms. It drives a magnetic lock or electric bolt such as the DS-K4H250S or DS-K4T100 directly.

What's in the Box

  • DS-K1T807MBFWX-QRE1 fingerprint access control terminal
  • Mounting bracket with screw pack and waterproof gasket
  • Wiring connectors for lock, exit button, door contact and alarm
  • Quick start guide

Buy with Confidence from Speed4Trading in Egypt

Speed4Trading supplies genuine Hikvision access control to integrators and end users right across Egypt from our Mokattam, Cairo base. If you are specifying an outdoor gate reader, talk to us first — the right enclosure, power method and lock choice matter more here than the data sheet does.

Genuine Hikvision Quality & Warranty

This is a 100% authentic Hikvision product supplied with official Hikvision warranty — confirm the brand and model on the official Hikvision website. Browse the rest of our fingerprint & time attendance terminals and the matching electric locks & door hardware.

Frequently Asked Questions

Can it be mounted outdoors?
Yes. It is IP65 rated with an operating range of -30 °C to 60 °C, which covers Egyptian outdoor conditions.

Can I run it over PoE?
Yes. It accepts either 12 VDC or PoE, so a single network cable from a PoE switch can power it.

How does QR code access work?
QR code is one of the supported authentication methods alongside fingerprint, card, PIN and Bluetooth — useful for issuing temporary access to visitors and contractors.

Will it work with my existing access controller?
Very likely. It provides RS-485 and Wiegand W26/W34 outputs so it can act as a reader for a third-party or Hikvision panel.

Best Price for the Hikvision DS-K1T807MBFWX-QRE1 in Egypt

Get the DS-K1T807MBFWX-QRE1 for just 7,641 EGP with genuine Hikvision warranty and fast delivery nationwide. Order now from Speed4Trading, or contact our team for help choosing the right solution.

موصى به

قد يعجبك أيضاً

اتخذ خيارات واثقة واكتشف الأفضل لك.