Hikvision DS-K4T108 Electric Bolt Lock for Wooden, Glass & Metal Doors

The Hikvision DS-K4T108 is a Value Series electric bolt (drop-bolt) lock for doors where the locking hardware should not be seen. The bolt is recessed into the head of the door frame and drops into a strike plate in the leaf, so with the door closed there is nothing on the surface at all — no bar, no bracket, no visible cabling. It runs on 12 VDC, locks automatically once its induction module detects that the door is properly closed, and reports the real door state back to your controller through NO/NC/COM contacts. For Egyptian offices, shops and clinics with glass or slim-framed doors on a tight budget, it is the sensible way to get a controlled door. Order the DS-K4T108 today from Speed4Trading with genuine Hikvision stock, official warranty and fast delivery across Egypt.

Why Buy the Hikvision DS-K4T108?

Not every door needs a Pro Series lock, but every door needs the lock to be the right type. On a glass shopfront or a narrow aluminium-framed office door, a magnetic lock means a visible bracket on the glass and a strike needs a frame that may not exist — an electric bolt avoids both. The DS-K4T108 keeps the essentials and drops the extras: automatic locking by induction when the door closes, door status contacts so the access control system knows the truth, a hard-anodised and electroplated shell that resists abrasion, and an internal surge-protection component to survive the voltage spikes that are a daily reality on Egyptian mains. At 740 g and 205 mm, it fits where there is very little room to work.

Key Features & Benefits

• Completely concealed in the door frame and leaf — nothing visible on a glass or designer door.
• Locks automatically once the induction module detects the door is properly closed, so it never gets left open by accident.
• Releases when power is interrupted, so it behaves correctly on an escape route wired through the fire alarm.
• Door status contacts (NO, NC, COM) let your controller raise door-forced and door-held alarms on real information.
• Built-in surge protection component guards the lock against mains voltage spikes — a genuine concern in Egypt.
• Hard-anodised, electroplated shell in abrasion-resistant materials for a long life on a busy door.
• Works on wooden, glass, metal and fireproof doors, so one part covers most of a mixed site.
• Compact 205 mm body at only 740 g, easy to fit into a slim aluminium or glass-door header.

Technical Specifications

• Lock type: electric bolt (drop bolt) lock, Value Series
• Input voltage: 12 VDC
• Current draw: 1.2 A maximum at startup, 0.2 A standby
• Dimensions: 205 × 34 × 42 mm
• Weight: 740 g
• Shell material: aluminium alloy, hard anodised and electroplated, abrasion-resistant
• Signal output: door lock status contacts (NO, NC, COM)
• Automatic locking: triggered when the induction module detects the door is closed
• Surge protection: internal voltage-dependent resistor (MOV)
• Suitable door types: wooden, glass, metal, fireproof
• Operating temperature: -10 °C to +55 °C
• Operating humidity: 0 to 95%

Perfect For

Glass shopfronts and retail entrances, small office and co-working doors, clinics, pharmacies and laboratories, mobile phone and accessory shops, slim aluminium-framed interior doors, meeting rooms and private offices, school administration doors, and multi-door sites where a consistent, inexpensive concealed lock is wanted throughout.

Easy Installation & Compatibility

The lock body is recessed into the head of the door frame with the strike plate set into the top edge of the leaf, so the installation is invisible once the door is shut. Power is a single 12 VDC feed from your access control power supply — size it for the 1.2 A startup current rather than the 0.2 A standby figure — switched by the lock output of a controller, exit button or reader. A Hikvision terminal such as the DS-K1T8003MF or DS-K1T8005MFWX-B drives it directly from its lock output. Wire the NO/NC/COM status contacts back to the controller's door contact input so alarms are based on the actual bolt position, and interrupt the lock feed through the fire alarm relay so the door releases in an emergency.

What's in the Box

• DS-K4T108 electric bolt lock body
• Strike plate
• Mounting and fixing screw pack
• Installation guide

Buy with Confidence from Speed4Trading in Egypt

Speed4Trading supplies genuine Hikvision door hardware from Mokattam, Cairo to customers all over Egypt, retail and trade alike. If you are fitting several doors, send us the door types and we will put together the locks, power supplies and brackets as one consistent list.

Genuine Hikvision Quality & Warranty

100% genuine Hikvision product with official Hikvision warranty — verify the brand on the official Hikvision website. If you need the Pro Series version with a selectable relock delay, compare the DS-K4T100 in electric locks & door hardware, and choose the reader from fingerprint & time attendance terminals.

Frequently Asked Questions

How is it different from the DS-K4T100?
The DS-K4T108 is the Value Series model. The Pro Series DS-K4T100 adds a selectable 0/3/6/9 second relock delay and a published 800 kg thrust and 500,000-operation rating.

Does it lock by itself?
Yes. The induction module detects when the door is properly closed and the bolt engages automatically.

What power supply do I need?
12 VDC. Standby draw is 0.2 A, but allow for 1.2 A at startup when sizing the supply.

Can it be fitted to a glass door?
Yes — wooden, glass, metal and fireproof doors are all supported. Tell us the door type and we will advise on the bracket you need.

Best Price for the Hikvision DS-K4T108 in Egypt

Get the DS-K4T108 for just 1,798 EGP with genuine Hikvision warranty and fast delivery nationwide. Order now from Speed4Trading, or contact our team for help choosing the right solution.