Hikvision DS-KAS342 Face Recognition Access Control Kit for One Door

The Hikvision DS-KAS342 is a complete single-door access control kit built around the DS-K1T342MFWX-E1 face recognition terminal. In one box you get the terminal, a DS-K4H255S magnetic lock with up to 272 kg holding force, the DS-K4H255-LZ L and Z mounting bracket, a DS-K7P07 touch-free exit button and three Mifare cards — everything one door needs, matched and ready to wire. For Egyptian offices, clinics, villas and small factories it removes the usual headache of buying a terminal, then discovering you still need the right lock, bracket and exit button. Order the DS-KAS342 today from Speed4Trading with genuine Hikvision stock, official warranty and fast delivery across Egypt.

Why Buy the Hikvision DS-KAS342?

Most first access control projects stall halfway through. The terminal arrives, then the glass door turns out to need a Z-bracket nobody ordered, the exit button is the wrong type for a hollow frame, and the lock on the shelf is not rated for the door. This kit removes all of that guesswork: Hikvision has already matched the terminal, the lock, the bracket, the exit button and the cards, so installation is a wiring job rather than a shopping expedition. You also get touch-free operation at both ends — face recognition to enter, a touch-free button to leave — which clinics and food businesses increasingly insist on.

Key Features & Benefits

• Everything for one door in a single box: terminal, magnetic lock, bracket, exit button and three cards
• Touch-free entry by face recognition and touch-free exit by sensor button — nothing to press, nothing to share
• Fast, accurate face recognition in under 0.2 seconds per person with over 99% accuracy, including with a mask
• Four ways in: face, fingerprint, Mifare card or PIN — so every type of user is covered
• Strong 272 kg magnetic lock suits wooden, glass and metal doors
• IP65 terminal with a -30 °C to 60 °C range, comfortable in Egyptian conditions
• PoE support means one network cable can power the terminal and the door lock
• Wi-Fi and wired networking, with web-client setup and two-way audio

Technical Specifications

• Kit contents: 1 × DS-K1T342MFWX-E1 face recognition terminal, 1 × DS-K4H255S magnetic lock, 1 × DS-K4H255-LZ bracket, 1 × DS-K7P07 touch-free exit button, 3 × FM11RF08-M1 cards
• Terminal display: 4.3-inch touch LCD, 272 × 480
• Terminal camera: two 2 MP wide-angle lenses, 720p video stream, WDR
• Face recognition: 0.3 to 1.5 m range, under 0.2 s per user, accuracy above 99%, mask recognition supported
• Capacity: 1,500 users, 1,500 faces, 3,000 fingerprints, 3,000 cards, 150,000 events
• Card reading: M1 card, 13.56 MHz, 0 to 5 cm, under 1 s
• Network: 10/100 Mbps wired plus Wi-Fi; TCP/IP, ISAPI and ISUP 5.0
• Terminal power: 12 VDC / 1 A adapter (included) or PoE (IEEE 802.3at, 37–57 VDC / 0.6 A), which can also power the lock
• Terminal protection and environment: IP65, -30 °C to 60 °C, 0 to 90% humidity non-condensing
• Terminal dimensions: 91.3 × 181.3 × 24.5 mm; net weight 0.36 kg
• Magnetic lock: up to 272 kg (600 lb) holding force, 12 VDC or 24 VDC (12 VDC default), unlock by current interruption, for wooden, glass and metal doors
• Magnetic lock dimensions: body 250 × 28 × 48 mm, armature plate 180 × 38 × 12 mm, weight 1.9 kg
• Bracket: aluminium alloy L-bracket for the lock body and Z-bracket for the armature plate, 0.5 kg
• Exit button: touch-free, stainless steel panel, 115 × 70 × 16 mm, NO/NC/COM contacts, green/blue status LED
• Cards: 13.56 MHz, 1 KB, read/write, read distance up to 10 cm

Perfect For

Offices and clinics fitting their first controlled door on a glass or wooden entrance. Villas and compound units wanting face entry at the main door. Small factories and workshops securing an office block or a parts store. Pharmacies and laboratories needing touch-free entry on hygiene grounds. Co-working spaces, training centres and salons with a single main entrance. Any project where one door must be done properly, quickly, without a parts list.

Easy Installation & Compatibility

The terminal is wall-mounted beside the door and connects either to a 12 VDC / 1 A adapter or to a PoE switch; under PoE the terminal can also supply 12 VDC to the magnetic lock, which saves running a separate power cable. The DS-K4H255S lock releases on current interruption, so the door opens if power is lost, and the supplied L and Z brackets cover surface-mounted and glass-door fixings. The DS-K7P07 exit button is designed for concealed installation in hollow door frames and offers NO/NC/COM contacts to suit most wiring schemes. Setup is done from the terminal's web client over Wi-Fi or the wired network; with ISAPI and ISUP 5.0 support it can also be brought into Hikvision management software when the site grows beyond one door.

What's in the Box

• DS-K1T342MFWX-E1 face recognition terminal with 12 VDC / 1 A adapter
• DS-K4H255S single-door magnetic lock
• DS-K4H255-LZ L and Z mounting bracket
• DS-K7P07 touch-free exit button
• Three FM11RF08-M1 Mifare cards

Buy with Confidence from Speed4Trading in Egypt

Speed4Trading supplies genuine Hikvision access control from Mokattam, Cairo, and we sell this kit because it is the one product that reliably gets a first door finished. Tell us the door material, the frame type and whether you have a PoE switch, and we will confirm the kit fits before it ships anywhere in Egypt.

Genuine Hikvision Quality & Warranty

100% authentic with official Hikvision warranty — verify the brand on the official Hikvision website. Browse our card readers and access controllers collection to extend the system to more doors, or see recognition terminals for the terminal on its own.

Frequently Asked Questions

Is this a kit or a single device?
It is a complete single-door kit: the DS-K1T342MFWX-E1 face recognition terminal plus a magnetic lock, bracket, touch-free exit button and three Mifare cards.

Will the magnetic lock work on a glass door?
Yes. The DS-K4H255S is rated for wooden, glass and metal doors, and the included L and Z brackets cover glass-door fixing.

Can one network cable power everything?
The terminal supports standard PoE (IEEE 802.3at), and under PoE it can supply 12 VDC to the door lock as well.

Does the door stay locked if the power fails?
No. The magnetic lock unlocks on current interruption, which is the usual fail-safe behaviour required for escape routes.

Best Price for the Hikvision DS-KAS342 in Egypt

Get the DS-KAS342 for just 16,127 EGP with genuine Hikvision warranty and fast delivery nationwide. Order now from Speed4Trading, or contact our team for help choosing the right solution.